High Speed Door Servo Control System
Introduction
Thank you for choosing High Speed Door Servo Control System.
Please read this manual carefully before you start to use the system. In this manual you will find instructions for how to set the operating code the controlunit, malfunction diagnostics and debugging, and routine maintenance.
Notice:
Before connecting the system to live wire place make sure the power supplyis off.
Please make sure the power voltage in the main circuit is the some ascontroller’s rated voltage. Also please make sure the ground terminal is properly and reliably connect to the ground wire.
DO NOT touch output terminal directly. DO NOT shot circuit the outputterminal and out shell.
After the power supply is cut, and before the LCD is off, there still highvoltage electricity in the circuit, so DO NOT touch the internal wiring and electronic components.
Internal wiring and electronic components are very sensitivity to staticelectricity, so DO NOT let any object contact the internal wiring and electronic components of motor driver and the main circuit of the touch control panel.
Inspection
All product has passed inspection and testing before is leaving the factory.
When you open the unit place make sure there is no damager during shipping.
Also to confirm the equipment ratings are matching your requirement.
General Characteristic
Our servo control system is suitable for high speed PVC and aluminum doors.
The system is in compact package, with high torque and high operating speed,lower noise, high reliability, smooth and soft operating curves, it’s suitable for high speed and intensive usage environment.
The rolling curtain can be controlled by wall switch, push button, bluetooth, radar,safety edge, photo eye, induction loops, etc.
Operating Speed: 0.5m/s-1.5m/s; Operating Width: ＜16 ㎡/30 ㎡/60 ㎡; Daily operating time: 2000 time; Rated voltage: 220V; Rated Output: 0.75KW/1.5KW/2.2KW。
大致翻译：
快速门伺服控制系统
介绍
感谢您选择高速门伺服控制系统。
在开始使用系统之前，请仔细阅读本手册。在本手册中，您将找到有关如何将操作代码设置为控制单元，故障诊断和调试以及日常维护的说明。
注意：
在将系统连接到火线之前，请确保电源已关闭。
请确保主电路中的电源电压是控制器的额定电压。另外，请确保接地端子正确可靠地连接到地线。
请勿直接触摸输出端子。不要射击输出端子和外壳。
切断电源后，在LCD关闭之前，电路中仍然存在高压电，因此请勿触摸内部接线和电子元件。
内部接线和电子元件对静电非常敏感，因此请勿让任何物体接触电机驱动器的内部接线和电子元件以及触摸控制面板的主电路。
检查
所有产品在出厂前都已通过检验和测试。
打开设备时，请确保在运输过程中没有损坏者。
同时确认设备额定值符合您的要求。
一般特征
我们的伺服控制系统适用于高速PVC门和铝门。
该系统采用紧凑型封装，具有高扭矩，高运行速度，低噪音，高可靠性，平稳柔软的操作曲线，适用于高速，密集的使用环境。
卷帘可以通过墙壁开关，按钮，蓝牙，雷达，安全边缘，光眼，感应线圈等进行控制。
运行速度：0.5m / s-1.5m / s;经营宽度：<16㎡/30㎡/60㎡;每日操作时间：2000次;额定电压：220V;额定输出：0.75KW / 1.5KW / 2.2KW。
